Water can enter your PVC roof

Mar 27

The possibility of water leaking into your business isn't something you want for your roof. There are a variety of ways water can enter your business. But which are the most common ways? Feel free to find out roofing services san antonio.

PVC roofing

With PVC materials, your roof will be waterproof from the very first day that it is installed. You must get a workmanship guarantee from the roofing company should it not be. For flat roofs of all kinds it is vital to have the proper drainage system in place. If you don't do so, it could cause ponding to develop. It is a good idea to look over your roof following the storm to see if there is any obvious damage. It is possible to spot possible damage before it develops into a much more costly and serious problem. Since most PVC roofs are prefabricated, there is less of a requirement to use field seaming. The more seaming that is done in the field the more prone the roof will be to water intrusion. This is because human error can occur during this process.

Zones that allow water to into

Anything that sticks from your roof, such as vents, chimney, or heating/cooling systems can open the way for unwanted water entrance. There is field seaming involved in any part that protrudes out of the roof. There are two options to seal leaks in the roof. Prefabricated pieces are a fantastic alternative. They require very little field seaming, and require much less time to put in. Another option is to have an individual perform the field seaming on the roof. This is time consuming and has plenty of room for errors.

The majority of the reasons that water may enter your roof stem from inadequate installation, which can cause your roof to deteriorate, or the age of your roof. If you start to see water starting to come inside your building even the smallest amount, call your trusted roofer. They will make sure that the leakage is dealt with quickly and does not impact other parts of the roof structure. Contact a roofing service in San Antonio, Texas or request a no-cost estimate.

Different Materials

If you have a flat roof there are many types of materials that can be used. They are TPO, EPDM, and PVC. You can find more information regarding the various kinds of roofing materials here. PVC is an ideal choice to stop wind-related damage. If you suffer an opening in your roof the wind can pick up the tear and rip it up even more. When you have PVC, PVC material, this is not the case. The PVC material will catch itself when it tears. This will save you money and give you the time to contact your roofing contractor.

EPDM roofing and TPO roofs have different types of protection. If you suffer from a tear in the TPO roof, wind will expand it and expose more of the materials underneath. This could be due to the formula of the material changing multiple times over time. EPDM roofs are more susceptible to tearing than PVC. However it is possible to repair them using the use of a patch. Roofing Contractors Near San Antonio, Texas will help you with this section.

In the end, if you think you've sustained wind-related damage, give your roofer an appointment. They will assess the damage and make repairs. There is a chance that you could qualify to receive the benefit of a warranty. Royalty can give a free estimate by calling Shield Roofing.